Service and maintenance of machine
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
195
1. Disconnect the hydraulic system of the
machine from the tractor.
The machine is depressurized.
2. Unscrew the filter casing (3) from the filter
head.
3. Remove the soiled filter element (1).
4. Clean the filter casing.
5. Grease the thread at the filter casing.
6. Check the O-ring (2) for damage. Replace a
damaged O-Ring (ø 67.95 mm x 2.62 mm).
7. Lubricate the O-ring of the new filter
element.
8. Slip the new filter element on as far as it will
go.
9. Screw the filter casing into the filter head as
far as it will go and turn it back by a one
quarter of a turn.
10. Tighten the screwed connection at a torque
of 150 Nm.
11. Switch the hydraulic system on and bleed
the filter at an appropriate point.
12. Check the filter for leaks.
Fig. 128
12.14 Tyres
12.14.1 Check tyres
Check the tyre pressure at least every 2 weeks. If the machine
has not been used for a longer time, the tyre pressure should be
checked before putting the machine into operation again.
Always ensure that the tyre pressure is properly adapted to the
load and the kind of work which has generally to be carried out
by the machine.
Never overload the tyres.
Ensure that the caps are seated on the valves and have been
tightened.
Preferably check the tyres during operation for "folds" or other
abnormal deformation.
Remove stones, pebbles, nails and other foreign objects stuck in
the tyre, as otherwise they further penetrate the tyre.
Have deeper cuts repaired as soon as possible.
Store "loose" tyres at a dark place, free of oil and other
chemicals.
Do not let tyres come near electric motors. The ozone produced
by the electric motors slowly dessicates the rubber.