Use of machine
158
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
10.2.2.2 Machine equipped with beaters
WARNING
Risk of being drawn in and becoming entangled within the area
of powered dosing drums when opening and closing the tailgate
and when discharging the machine!
Make sure that people leave the swivelling range of the tailgate
before pressing the
,
or
key.
Press the
key only with the tractor's p.t.o. shaft stopped!
Non-observance of this information may cause damage to the
angular switchgear for coupling the powertrain to the dosing
drums.
Reduce the feed rate for the transport floor during discharge if
the control set frequently generates the acoustic and visual
signal "Forage wagon full".
The dosing drums may become clogged if the feed rate for the
transport floor is not reduced.
1. Press the
key once to switch the
Road travel mode
off.
2. Press the
key until the pick-up has sufficient ground clearance.
The following functions will be automatically carried out one after the other:
2.1 Lock steering axle.
2.2 Lift folding drawbar.
3. Move onto the bunker silo.
4. Press the
key for a short time when being on the bunker silo.
The following functions will be automatically carried out one after the other:
4.1 Lift tailgate until the first set opening width is reached.
4.2 Switch gearboxes and clutches.
4.3 Switch transport floor to standby mode when the tailgate has reached its end position. The
"Feed On" symbol is flashing on the control set.
5. Switch the tractor's p.t.o. shaft on.
6. Let the tractor's p.t.o. shaft smoothly start to run such that the dosing drums are able to loosen
themselves.
The dosing drums start to run and after a short delay, the transport floor automatically starts.
6.1 Switch the tractor's p.t.o. shaft immediately off if the slip clutch responds.
6.2 Press the
key to switch the transport floor feed function off.