Service and maintenance of machine
178
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
1. Open the right-hand movable side protector.
2. Secure the open right-hand side protector
against accidental slamming.
3. Relieve the friction clutch (1) by equally
tightening the nuts (2).
4. Close the right-hand movable side protector
and lock it in protective position.
5. Start the tractor engine.
6. Charge the machine with material to be
loaded for a short time such that the stuck
friction clutch slips for 2 to 3 seconds and is
freed (excessive slipping will damage the
friction linings).
Repeat this procedure up to three times if
the friction clutch does not slip.
7. Turn the tractor engine off.
8. Pull the ignition key out.
9. Open the right-hand movable side protector.
10. Secure the open right-hand side protector
against accidental slamming.
11. Charge the friction clutch by turning the nut
back up to the end of thread (3).
12. Close the right-hand movable side protector
and lock it in protective position.
Fig. 104
Fig. 105
12.8.2 Remove/Mount friction and compensating clutch of CFS drum
1. Open the right-hand movable side protector.
2. Secure the open right-hand side protector
against accidental slamming.
3. Remove the circlip (1).
4. Move the casing (2) downward.
5. Remove the hexagon screws (3).
6. Pull the flange (4) with the coupling half (5)
off to the side.
7. Remove the hexagon screw (6).
8. Push the friction and overrunning clutch
downward.
9. Pull the friction and overrunning clutch (7)
off to the side.
10. Mount the friction and overrunning clutch in
reverse order.
11. Close the right-hand movable side protector
and lock it in protective position.
Fig. 106