Service and maintenance of machine
166
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
12.1
Service and maintenance plan - Overview
Observe the detailed information in the following chapters about
service and maintenance, in particular about the maintenance of
chassis and axles.
The maintenance intervals specified in the included sub-supplier
documentation shall prevail.
Carry out the maintenance intervals according to the time limit
reached first.
Before first start-up and after longer downtimes
Check:
the wheel nuts for tightness, retighten if necessary.
all screwed connections for:
drawbar,
chassis,
hydraulic system.
Retighten if necessary.
the float of the wheel hub bearing.
all components of the hydraulic system for tightness and visible defects, immediately remedy or
have remedied leaks and defects if necessary.
the oil level of all gearboxes, top up if necessary.
the tyre pressure, readjust if necessary.
Bleed the friction clutch of the pick-up and the friction and compensating clutch of the CFS drum.
Daily
Check:
the machine for visible defects.
Immediately remedy or have remedied visible defects.
the cutting knives for sharpness. Turn blunt cutting knives over or sharpen them.
the lighting system for proper functioning.
the service brake system for proper functioning.
the parking brake for smooth action.
Lubricate all movable parts of the parking brake if necessary.
the travelling height of the hydraulic levelling system of the hydro-pneumatic tandem chassis (if
available).
the tension of the transport floor chains, shorten chain if necessary.
the tension of the roller chain for the CFS drum drive, retighten if necessary.
Drain the compressed-air reservoir of the compressed-air brake system via the drain valve.
Use compressed air to clean the cutting unit, in particular the retainer of the cutting knives and the
knife security system.