Stephan EVETR, Instructions For Use Manual, Page: 55 / 254

®
3 Design and functional description

Fritz Stephan GmbH GA-070T-0518V2.7-HAO-EN 55
Item Set 1 Set 2 Set 3
1
Pplat
(cannot be configured)
O
2
Pmean
2 VTe VTe VTe
3 MVe EtCO2 VTespon
4 ftotal SpO2 Ppeak
5 PEEP Pulse VTleak
Tab. 4: Basic configuration of the measured value indicator's three sets
With the exception of Pplat, the user can freely configure the type and
sort order of measured values in the three sets in the control panel
(see chapter 4.3.1). The measured values listed in the following table are
determined by the ventilator and can be displayed:
Category Measured value Description Unit
Pressure Ppeak Inspiratory peak pressure mbar
Pplat Plateau pressure mbar
Pmean Mean airway pressure mbar
PEEP Positive end expiratory pressure mbar
Volume MVe Expiratory respiratory minute volume l/min
MVespon Spontaneous expiratory respiratory minute volume l/min
VTe Expiratory tidal volume ml
VTespon Spontaneous expiratory tidal volume ml
VTleak Leak ml
Flow V´min Minimum flow l/min
V´max Maximum flow l/min
Time Tinsp Inspiration time s
Texp Expiration s
ftotal Total respiratory rate
(mech spontaneous respiratory rate) 1/min
fspon Spontaneous respiratory rate 1/min
I:E Inspiration time ratio -