Stephan EVETR Instructions For Use Manual Download Page 187

Page: 187 / 254

8 CO2 measurement (optional)



Fritz Stephan GmbH

GA-070T-0518V2.7-HAO-EN

187

WARNING

Always use a bacterial filter on the waste gas side if the collected sample gas should
be breathed back.

WARNING

Use only T adapters whose sample collection point is located in the middle of the
adapter.

WARNING

Excessive scavenger system pressure may impact gas sample flow.

WARNING

Waste gas must be returned to the patient system circuit or a scavenger system.

WARNING

Do not position the ISA™ analyzer in a way where it is at risk of dropping onto the
patient.

WARNING

Position the ISA™ analyzer securely to avoid device damage.

WARNING

Do not put strain on the ISA™ analyzer's cable.

Summary of Contents for EVETR































































































































































































































































Search results

Summary of Contents for EVETR

Reviews:

Stephan EVETR, Instructions For Use Manual, Page: 187 / 254

Search results

Summary of Contents for EVETR

Reviews: