Sony MG40 Series, Command Reference Manual

Page: 92 / 140

4-4
(E)
MG40 Series
4-3. Operation Commands

Operation mode
Th is function is used to switch between the setup mode and measurement mode and acquire the current
statuses.
Set
Setup
mode
Ethernet CC-Link
Measurement
mode
The command is used to switch between the setup mode and measurement mode.
Command format
MOD=<Operation mode>
<Operation mode> 0 : Setup mode (Factory setting)
1 : Measurement mode
Return format Execution results
Target MG41 main unit
Save setting values Setting values not saved.
Examples of use Transmission :
MOD=1
(Set the measurement mode.)
Return : OK000 (Successfully completed.)
Compatible command None
Acquire
Setup
mode
Ethernet CC-Link
Measurement
mode
The command is used to acquire the current operation mode.
Command format
MOD?
Return format MOD=<Operation mode>
<Operation mode> 0 : Setup mode
1 : Measurement mode
Target MG41 main unit
Example of use Transmission :
MOD?
(Acquire the current operation mode.)
Return : MOD=1 (Current mode is measurement mode.)
Compatible command None