Sony MG40 Series, Command Reference Manual

Page: 127 / 140

(E)
4-39
MG40 Series

Data transmission protocol
Th is function is used to set the protocol which is to be used by the data interface.
Set
Setup
mode
Ethernet
The command sets the protocol which is to be used by the data interface.
Command format
NPC=<Value>
<Value> 0 : TCP (Factory setting)
1 : UDP
Return format Execution results
Target MG41 main unit
Save setting values Setting values saved.
Examples of use Transmission :
NPC=0
Return : OK000
Compatible command None
Acquire
Setup
mode
Ethernet
Measurement
mode
The command acquires the protocol which is used by the data interface.
Command format
NPC?
Return format NPC=<Value>
<Value> 0 : TCP
1 : UDP
Target MG41 main unit
Examples of use Transmission :
NPC?
Return : NPC=0
Compatible command None