Sony MG40 Series, Command Reference Manual

Page: 123 / 140

(E)
4-35
MG40 Series

IP address
Th is function is used to set and acquire the Ethernet source station IP address.
Th e IP address setting is refl ected the next time the equipment is started up.
When an IP address is acquired aft er its setting has been changed, the IP address set before the change is
refl ected will be acquired.
Set
Setup
mode
Ethernet
The command sets the Ethernet source station IP address.
Command format
NIP=<IP address>
<IP address> 1.0.0.1 to 223.255.255.254 (excluding 127.x.x.x)
(Factory setting: 192.168.1.100)
Return format Execution results
Target MG41 main unit
Save setting values Setting values saved. (Th e setting values are saved at the same time as the setting
command is executed.)
Examples of use Transmission :
NIP=192.168.1.10
Return : OK000
Compatible command None
Acquire
Setup
mode
Ethernet
Measurement
mode
The command acquires the Ethernet source station IP address.
Command format
NIP?
Return format NIP=<IP address>
<IP address> 1.0.0.1 to 233.255.255.254
Target MG41 main unit
Examples of use Transmission :
NIP?
Return : NIP=192.168.1.10
Compatible command None