Sony MG40 Series, Command Reference Manual

Page: 130 / 140

4-42
(E)
MG40 Series

Measuring unit user information
Th is function is used to set/acquire the user information of the measuring unit which has been
connected.
Set
Setup
mode
Ethernet CC-Link
The command sets the user information of the measuring unit which has been connected.
Command format
AXU Designated axis =<User ID>
<User ID> Hexadecimal ASCII notation (2 characters)
Return format Execution results
Target Designated axis
Save setting values Setting values saved. (Th e setting values are saved at the same time as the setting
command is executed.)
Examples of use Transmission :
AXU[00A]=01
Return : OK000
Compatible command None
Acquire
Setup
mode
Ethernet CC-Link
The command acquires the user information of the measuring unit which has been connected.
Command format
AXU Designated axis ?
Return format AXU Designated axis =<User ID>
<User ID> Hexadecimal ASCII notation (2 characters)
Target Designated axis
Examples of use Transmission :
AXU[00A]?
Return : AXU[00A]=00
Compatible command None