Sony MG40 Series, Command Reference Manual

Page: 138 / 140

6-2
(E)
MG40 Series
Numbers in the A0’s: Main unit hardware-related errors
A0 Communication timeout Communication has timed out.
A disconnected cable, broken cable, power supply trouble or
equipment failure may be to blame.
A1 Communication error Th ere is an error in what has been communicated.
Noise, cable trouble or an equipment failure may be to blame.
A2 Power supply error Th e supply voltage is insuffi cient.
Check the power supplies.
A4 Version mismatch Th e version combination does not enable operation.
A5 Save setting value memory error Th e settings were initialized to the factory settings due to errors
in the contents of the memory where the setting values were
saved.
Numbers in the B0’s: Hub unit hardware-related errors
B0 Communication timeout Communication has timed out.
A disconnected cable, broken cable, power supply trouble or
equipment failure may be to blame.
B1 Communication error Th ere is an error in what has been communicated.
Noise, cable trouble or an equipment failure may be to blame.
B2 Power supply error Th e supply voltage is insuffi cient.
Check the power supplies.
Numbers in the C0’s: Measuring unit-related errors
C0 Communication error Measuring unit has detected an error in the communication
system.
C1 System error Measuring unit has detected system trouble.