Sony MG40 Series, Command Reference Manual

Page: 108 / 140

4-20
(E)
MG40 Series

Master calibration function
Th is function is used to set whether the master calibration function is to be used and acquire the setting.
Th e master calibration funciton setting is refl ected the next time the equipment is started up.
When the master calibration function is to be used, neither the datum point function nor the axis
calculation function can be used.
Set
Setup
mode
Ethernet CC-Link
The command sets the master calibration function to On or Off .
Command format
MCM=<Value>
<Value> 0 : Off (Master calibration is not used.) (Factory setting)
1 : On (Master calibration is used.)
Return format Execution results
Target MG41 main unit
Save setting values Setting values saved.
Examples of use Transmission :
MCM=1
Return : OK000
Compatible command None
Acquire
Setup
mode
Ethernet CC-Link
Measurement
mode
The command acquires the current master calibration function status.
Command format
MCM?
Return format MCM=<Value>
<Value> 0 : Off (Master calibration is not used.)
1 : On (Master calibration is used.)
Target MG41 main unit
Examples of use Transmission :
MCM?
Return : MCM=0
Compatible command None