Simplicity Baron, Operator'S Manual

Page: 132 / 288

Striber
Striber forekommer når tynde striber uklippet græs lades tilbage efter klipperen. Striber skyldes ofte forkert brug eller
dårlig vedligeholdelse af knivene.
Årsag Løsning
Knivene er ikke skarpe Slib knivene
Knivene er slidt for langt ned Udskift knivene
Motoromdrejningerne er for lave Klip altid med fuld gas på motoren
Kørehastigheden er for høj Sæt farten ned
Klipperen er stoppet til med græs Rens klipperen
Der overlappes ikke nok mellem rækkerne Overlap mere
Der overlappes ikke når der drejes Når der drejes mindskes overlapningen – overlap mere
DA
D-26
,,,,,,,,,
,,,,,,,,,
,,,,,,,,,
,
,
,
,,
,,
,,
Streaking
Streaking is when thin strips of uncut grass are left behind the mower. Streaking is usually caused by operator error or
poor blade maintenance.
Cause Solution
Blades are not sharp Sharpen your blades
Blades are worn down too far Replace your blades
Engine speed is too slow Always mow at full throttle
Ground speed is too fast Slow down
Deck is plugged with grass Clean out the mower
Not overlapping cutting rows enough Overlap your cutting rows
Not overlapping enough when turning When turning, your effective cutting width decreases;
overlap more when turning
GB