Siemens SIMOTRAS 6SG7050, Operating Instructions Manual

Page: 371 / 604

01.04 Parameter list
SIEMENS AG 6SG7000-0BA76
11-23
SIMOTRAS HD Operating Instructions
PNU Description Value range
[Unit] No. indices See
Change
P182
FDS
(G160)
Positive torque limit 2
If "Torque limit switchover" is selected (state of binector selected in P694
=1) and the speed is higher than the threshold speed set in parameter
P184, then torque limit 2 is activated in place of torque limit 1.
-300.00 to 300.00
[%]
0.01% of rated motor
torque Ind: 4
FS=300.00
Type: I2 P052 = 3
P051 = 40
Online
P183
FDS
Negative torque limit 2
If "Torque limit switchover" is selected (state of binector selected in P694
=1) and the speed is higher than the threshold speed set in parameter
P184, then torque limit 2 is activated in place of torque limit 1.
-300.00 to 300.00
[%]
0.01% of rated motor
torque Ind: 4
FS=-300.00
Type: I2 P052 = 3
P051 = 40
Online
P184
FDS
(G160)
Threshold speed for torque limits
If "Torque limit switchover" is selected (state of binector selected in P694
=1) and the speed (K0166) is higher than the threshold speed set in
parameter P184, then torque limit 2 (P182, P183) is activated in place of
torque limit 1 (P180, P181).
0.00 to 120.00
[%]
0.01% of maximum
speed Ind: 4
FS=0.00
Type: O2 P052 = 3
P051 = 40
Online
P191
FDS
(G162)
Filter time for setpoint for current controller [SW 1.9 and later]
Filtering of the current setpoint at the input of the current controller.
The purpose of this filter is to decouple the current precontrol from the
current controller.
0 to 10000
[ms]
1ms Ind: 4
FS=0
Type: O2 P052 = 3
P051 = 40
Online
11.11 Speed controller
further parameters for the speed controller P550 - P563
Setting values for speed controller - actual value/setpoint processing
P200
FDS
(G152)
Filter time for actual speed controller value
Filtering of the actual speed value by means of a PT1 element.
0 to 10000
[ms]
1ms Ind: 4
FS=10
Type: O2 P052 = 3
P051 = 40
Online
P201
FDS
(G152)
Band-stop 1: Resonant frequency 1 to 140
[Hz]
1Hz Ind: 4
FS=1
Type: O2 P052 = 3
P051 = 40
Online
P202
FDS
(G152)
Band-stop 1: Quality
0 Quality = 0.5
1 Quality = 1
2 Quality = 2
3 Quality = 3
0 to 3
1 Ind: 4
FS=0
Type: O2 P052 = 3
P051 = 40
Online
P203
FDS
(G152)
Band-stop 2: Resonant frequency 1 to 140
[Hz]
1Hz Ind: 4
FS=1
Type: O2 P052 = 3
P051 = 40
Online
P204
FDS
(G152)
Band-stop 2: Quality
0 Quality = 0.5
1 Quality = 1
2 Quality = 2
3 Quality = 3
0 to 3
1 Ind: 4
FS=0
Type: O2 P052 = 3
P051 = 40
Online
P205
FDS
(G152)
D element: Derivative-action time
0 to 1000
[ms]
1ms Ind: 4
FS=0
Type: O2 P052 = 3
P051 = 40
Online
P206
FDS
(G152)
D element: Filter time 0 to 100
[ms]
1ms Ind: 4
FS=0
Type: O2 P052 = 3
P051 = 40
Online
r217
(G152)
Indication of the active droop of the speed controller [SW 1.7 and later] 0.0 to 10.0
[%]
0.1% Ind: None
Type: O2 P052 = 3
r218
(G151)
(G152)
Indication of the active integration time of the speed controller
[SW 1.7 and later]
0.010 to 10.000
[s]
0.001s Ind: None
Type: O2 P052 = 3
r219
(G151)
(G152)
Display of effective P gain of speed controller
0.10 to 200.00
0.01 Ind: None
Type: O2 P052 = 3
P221
FDS
(G152)
Speed controller: Hysteresis for speed-dependent PI/P controller
switchover
[SW 1.9 and later]
See P222 for further details.
0.00 to 100.00
[%]
0.01% of maximum
speed Ind: 4
FS=2.00
Type: O2 P052 = 3
P051 = 40
Online