Safety information
01.04
1-2
SIEMENS AG 6SG7000-0BA76
SIMOTRAS HD Operating Instructions
NOTE
These operating instructions do not purport to cover all details or variations in equipment, nor to
provide for every possible contingency to be met in connection with installation, operation or
maintenance.
Should further information be desired or should particular problems arise which are not covered
sufficiently for the purchaser's purposes, the matter should be referred to the local Siemens
Sales Office.
The contents of these operating instructions shall not become part or modify any prior or existing
agreement, commitment or relationship. The Sales Contract contains the entire obligations of
Siemens. The warranty contained in the contract between the parties is the sole warranty of
Siemens. Any statements contained herein do not create new warranties or modify the existing
warranty.
DANGER
Converters contain hazardous electrical voltages, Death, severe bodily injury or significant
material damage can occur if the safety measures are not followed. The following precautions
should be taken in order to reduce the risk of death or injury.
1.
Only qualified personnel, who are knowledgeable about the converters and the provided
information, can install, start up, operate, troubleshoot or repair the converters.
2.
The converter must be installed in accordance with the relevant safety regulations (e.g. DIN,
VDE), as well as all other relevant national and local regulations. It must be ensured that the
grounding, cable dimensioning and appropriate short-circuit protection have been
implemented to guarantee operational safety and reliability.
3.
All panels and doors must be kept closed during normal operation.
4.
Before carrying out visual checks and maintenance work, ensure that the AC power supply
is disconnected and locked out. Before the AC supply is disconnected, both converters and
motors are at hazardous voltage levels. Even when the converter contactor is open,
hazardous voltages are still present.
5.
When making measurements with the power supply switched on, electrical connections
must not be touched under any circumstances. Remove all jewellery from wrists and fingers.
Ensure that the test equipment is in good conditions and operationally safe.
6.
When working on units which are switched on, stand on an insulating surface, i.e. ensure
that you are not grounded.
7.
Carefully follow the relevant instructions and observe all danger, warning and cautionary
instructions.
8.
This does not represent a full listing of all the measures necessary for safe operation of the
equipment. If you require other information or if certain problems occur which are not
handled in enough detail in the information provided in the Instruction Manual, please
contact your local Siemens office.
Summary of Contents for SIMOTRAS 6SG7050
