Siemens SIMODRIVE 611A, Installation And Planning Manual

Page: 29 / 329

02.98
1-29

Siemens AG 1998 All Rights reserved 6SN1197–0AA00 02.98 Edition
SIMODRIVE 611 (PJ)
All of the specified outputs are valid up to an installation altitude of 1000 m. For
an installation altitude > 1000 m, the specified outputs should be reduced ac-
cording to the diagrams below. For installation altitudes > 2000 m
1)
an isolating
transformer must be used (refer to Section 2.4).
100 %
0 1000 2000 Installation altitude (m)
80 %
60 %
40 %
20 %
0 %
3000 4000 5000
X
H
P
n altitude
=x
H
P
n1000m
/100%
P
n altitude
=x
H
P
s61000m
/100%
P
max. altitude
=x
H
P
max.
1000m
/100%
Figure 3-3
Caution: P
n
, P
s6
and P
max
must be de–rated in the same way.
Table 3-5 UE modules with pulsed resistors
Pulsed resistors, technical data
External pulsed
resistor 0.3/25
kW External pulsed
resistor 1.5/25
kW Internal pulsed
resistor 0.3/25
kW Internal pulsed
resistor 0.2/10
kW
Order No.,
pulsed re-
sistor 6SN1113–
1AA00–0DA0 6SN1113–
1AA00–0CA0 – –
Integrated
in – – UE 10 kW,
pulsed resistor
module UE 5 kW
Can be
used for UE module 28
kW UE module 28
kW – –
Can be
used for
–
Pulsed resistor
module
6SN1113–
1AB0
–0BA
– –
Pn 0.3 kW 1.5 kW 0.3 kW 0.2 kW
P
max
25 kW 25 kW 25 kW 10 kW
E
max
7.5 kWs 180 kWs 7.5 kWs 13.5 kWs
Degree of
protection IP 54 IP20 refer to module refer to module
Dimension drawings, refer to p. 1-161
1)
The rated insulation voltage depends on the installation altitude.
De–rating as a
function of the in-
stallation altitude
3.2.1 Technical data, supply infeed modules