09.95
Siemens AG 2001
All Rights Reserved
6FC5197–
j
AA50
4–33
SINUMERIK 840C (IA)
’0’ ’0’ ’0’ ’0’ ’0’ // TermiIBN
a 1 1 3
a 2 1 114 ’7’ ’11’ ’12’ ’13’ ’0’ \
’0’ ’0’ ’0’ ’0’ ’0’ \
’0’ ’0’ ’0’ ’0’ ’0’ // TermiSimulation
//a 2 1 114 ’11’ ’12’ ’13’ ’0’ ’0’ \
// ’0’ ’0’ ’0’ ’0’ ’0’ \
// ’0’ ’0’ ’0’ ’0’ ’0’ // TermiSimulation
a 1 1 3
a 1 1 1 15 // BAPPLANZ
a 1 1 2 12 // BINPUTMODE
a 1 1 5 106 // BBUSY_FCOL
a 1 1 6 98 // BBUSY_BCOL
a 1 1 7 0 // BSK_NOT_CENTER
a 1 5 1 CO // BCOLORMONO_DEF
a 1 5 2 PO // BPOSNEG_DEF
a 1 5 4 MMCSYS:BIN/ // BPOSNEG_DEF
a 1 5 6 TIFF // BHARDCOPY_DEF
a 1 5 7 0 // Hardcopy File Format
a 1 7 0 3600000 // BSCREENSAVE
i 1 2 15000 2 // BANZLINESMZ_DEF
i 1 2 2207 0 // BAEFGCOLOR_DFLT
i 1 2 2208 7 // BAEBGCOLOR_DFLT
i 1 2 2209 0 // BAESATZNR_FLAG_DFLT
i 1 2 2210 5 // BAESATZNR_STEP_DFLT
i 1 2 2211 5 // BAESATZNR_START_DFLT
l 1 2 16000 0 // Change to 1 only when MMC-CPU with 16MB RAM
l 1 2 16001 0 //
l 1 5 16002 0 // HD Bytes free
l 1 5 16003 . // Name for search
l 1 6 16004 0 // Simulation
l 1 2 15010 0 // Icon 1
l 1 2 15011 0 // Icon 2
l 1 2 15012 0 // Icon 3
l 1 2 15013 0 // Icon 4
l 1 2 15014 0 // Icon 5
Note
The parameters described below are to be found in different lines of file
BEDCONF depending on the software version.
BAPPL CLUTLIST
The parameter BAPPL CLUTLIST defines whether a CLUT list is assigned to the
area in question. Enter a “1” to activate the CLUT list assigned to this area.
BSYSFONT
The parameter BSYSFONT assigns a character set to the language which is set
in the KONFIG configuration file in the MASTER CONTROL area. The value 0 is
assigned to the European languages (Standard languages). The value 1 is assi-
gned to the Russian language (cyrillic character set). The value 2 is assigned to
the scandinavian languages (Hungarian).
With SW 4.4 and higher, the character set is defined by an entry in the configura-
tion file of the master control.
BSK_NOT_CENTER
This parameter defines whether the softkey texts are to be output centered or
(as from SW 5.4)
without any formatting. The default setting is centered. If the value is changed to
1, the centering is deactivated and the texts in the softkeys appear in the way
they have been configured.
BCOLORMONO_DEF
The parameter BCOLORMONO_DEF defines whether the screen display is in
monochrome mode (enter MO) or in color mode (enter CO).
You can enter MO or CO here but be sure to enter the parameter in capital let-
ters.
4 MMC Area Diagnosis
4.4.3 BEDCONF configuration file
04.96
Summary of Contents for SIMODRIVE 611-D
Page 2: ......
