09.95
Siemens AG 2001
All Rights Reserved
6FC5197–
j
AA50
9–3
SINUMERIK 840C (IA)
The following start conditions must be fulfilled when the
measuring functions are started.
S
NC operating mode “JOG” selected.
S
No traversing command for the axis/spindle (NCK or com-
mand channel).
The “Overstore” function is disabled while the measurement is in progress. The
axis or spindle interface is operated depending on which interface (spindle or (C)
axis) is active when test mode is selected.
Operating mode on
selection
Active interface
DB number
C-axis mode
Axis interface
DB 29/32
Spindle operating mode
Spindle interface
DB 31
Axis mode (feed axis)
Axis interface
DB 29/32
The measurement function for the current control loop must
not be used for suspended axes without an external weight
balance. When a mechanical brake is fitted, it must be
ensured that it cannot be released by electrical means.
Automatic quadrant
The purpose of the quadrant error compensation function is to
error compensation
minimize contour errors resulting from friction, backlash and
with integrated
torsional strain during reversal.The following functions are provided with
circularity test
SW 4 to allow the detection and compensation of quadrant errors:
(option – SW 4)
S
Automatic setting of quadrant error compensation to facilitate start-up.
S
Integrated circularity test to provide visual display of axis performance and for
diagnostic purposes.
Trace function
A storage oscilloscope function with 4 user-parameterizable
(user-parameterizable
channels has been introduced as a supplement to the start-up functions
oscilloscope
implemented in SW 3 to date. This oscilloscope function makes it possible
function – SW 4)
to record important signals for optimization and diagnostic purposes during
start-up and in operation.
9 Drive Servo Start-Up Application (as from SW 3)
10.94
Summary of Contents for SIMODRIVE 611-D
Page 2: ......
