Siemens 6GA7202-2AA10-1BF1, Operating Instructions Manual, Page: 86 / 168

3. Enter these values (K1, K2, S1, S2) in the two formulas:
– Scale = (S1-S2) / (K1-K2)
– Offset = S1 – resolution * K1
4. Enter the following calculated values under "Program" → "CenSOR" → "Measured values for
parameters": "Scale" and "Offset"
&DPHUDWRUHIOHFWRUGLVWDQFH
3RVLWLRQ
3RVLWLRQ
5HIOHFWRU
+RLVWLQJKHLJKW
7UROOH\
6,02&5$1(
&HQ62509
.
.
6
6
Figure 8-8 Parameterizing external distance
Output parameters
Parameter Possible values Default Description
X measured value
Offset -10 000 ... +10 000 mm 0 Calibration value for deflection in the X direc‐
tion
X measured value
Smoothing time 0 ... 10 s 0.00 Smoothing time for smoothing of deflection
in the X direction
Y measured value
Offset -10 000 ... +10 000 mm 0 Calibration value for deflection in the Y direc‐
tion
Y measured value
Smoothing time 0 ... 10 s 0.00 Smoothing time for smoothing of deflection
in the Y direction
Skew
Offset -180° ... +180° 0.00 Calibration value for the skew measured val‐
ue
Parameterization
8.2 Application
SIMOCRANE CenSOR
84
Operating Instructions, 07/2021