Siemens 6GA7202-2AA10-1BF1, Operating Instructions Manual, Page: 74 / 168

Parameter/
button Description
Image focus Not relevant for SIMOCRANE CenSOR MV540 H
Exposure balance
Set distance
Zoom
You can scale the image display using the zoom bar.
You can use the thumbnail below the zoom bar to determine which section of the image display you
are in.
Result view
This group shows the settings for displaying the processing results.
The "Refresh display" button allows you to preview the results of your settings in the program
steps of the "Program" menu.
Table 8-10 Result view
Parameter/
button Description
Formation of
result Selection of formation of result view
Activate/
deacti‐
vate for‐
mation of
result
/
Activate/deactivate formation of result in the image display:
If formation of result is activated, processing of the current program step is conducted for every new image
acquired.
When the "Program" page of the WBM is open, you can also activate or deactivate formation of result directly
on the camera using the "READ" button.
Note that formation of result is automatically deactivated when you switch to the program steps "Overview"
and "Image acquisition".
Refresh
result Restriction: The "Activate formation of result" function was previously selected and the camera has the "Edit"
status.
Refreshes the display of results in the image display.
The current image is processed once again for this purpose.
Details You can use the control elements under Details to define which information and results are shown in the image
display and which are hidden.
Regions Activate/deactivate ROI display:
Not relevant for SIMOCRANE CenSOR MV540 H
The following result details are available, depending on the selected task and the active settings:
Search ROIs:
Not relevant for SIMOCRANE CenSOR MV540 H
Result ROIs:
Not relevant for SIMOCRANE CenSOR MV540 H
Parameterization
8.2 Application
SIMOCRANE CenSOR
72
Operating Instructions, 07/2021