Siemens 6GA7202-2AA10-1BF1, Operating Instructions Manual, Page: 53 / 168

3. In the main menu, click "Network Analysis". A new window opens. Depending on the size of
the network, it may take a while before all the detected nodes are displayed. Look for the
"SIMATIC MV540H CRANES" camera.
Figure 7-3 PRONETA - Network Analysis
4. Double-click the camera icon. The menu "Set Network Parameters" opens. Enter the IP
address and the subnet mask (network mask) and click "Set" to close the window.
Figure 7-4 PRONETA - Set Network Parameters
5. The camera now has the required IP address. You can also see this in the "Device Table" under
"Graphical View". You can now close PRONETA Basic.
Commissioning
7.2 Connecting the camera
SIMOCRANE CenSOR
Operating Instructions, 07/2021
51