Siemens 6GA7202-2AA10-1BF1, Operating Instructions Manual, Page: 105 / 168

Monitoring
In this group, you specify whether live images are displayed in processing mode.
Table 8-30 Monitoring
Parameter Possible values Default Description
During processing • Auto
• Off
• On Auto Here you specify whether a live image is to be dis‐
played on the "Run" page in processing mode:
• Off: No live image
• On: Live image is displayed
• Auto: Live image is displayed load-dependent
Persistence (persistent data storage)
In this group, you specify which diagnostic information you want to store permanently on the
EPROM.
Table 8-31 Persistence
Parameter/
button Possible values Default Description
Save next error image ☐ / ☑ ☐ The image belonging to the next NOK signal is saved in
the EPROM. If an image is already stored there, it is
overwritten when this function is selected.
Save next data records ☐ / ☑ ☐ As soon as the function is activated, the number of
diagnostics entries you specify in the following input
box are saved in the EPROM. Existing entries are de‐
leted when you switch over to On. If the diagnostics
buffer in the EPROM reaches the number of perma‐
nently storable diagnostic data records, no further en‐
tries are made.
Note
Deleting takes several seconds.
Number of data re‐
cords 10 ... 2000 2000 See "Save next data records" parameter.
Note
This input box is active only when you have selected
the "Save next data records" check box.
Delete image -- -- When you click this button, you delete an image stored
in the EPROM.
Note:
This button is only active when there is an image in the
EPROM.
Delete entries -- -- When you click this button, you delete all diagnostics
entries stored in the EPROM.
Note:
This button is only activated if diagnostic entries are
already stored in the EPROM.
Persistent storage of an error image
Parameterization
8.4 Settings
SIMOCRANE CenSOR
Operating Instructions, 07/2021
103