Siemens 6GA7202-2AA10-1BF1, Operating Instructions Manual, Page: 100 / 168

Internal lamp / External lamp
Note
Changes to connected lamp / connection of a different lamp:
Programs no longer executable
Note:
If you subsequently change the parameters of a selected lamp or connect a different lamp, all
programs that use these lamps (internal or external) are marked as non-executable.
In order to use a non-executable program again, you must check the exposure settings and save
the program again.
Note
Internal lamp
The internal lamp is not relevant for SIMOCRANE CenSOR.
Table 8-26 Internal lamp / External lamp
Parameter Possible values Default Description
Supply over PoE or
CM ☐ / ☑ ☐ Not relevant for SIMOCRANE CenSOR
Lamp Internal
• Auto (<article num‐
ber>)
• 6GF3440-8DA11
• 6GF3440-8DA21
• 6GF3440-8DA41
• Other
• None
Auto (<article num‐
ber>)
Not relevant for SIMOCRANE CenSOR
External
• None
• Other
• <Article number> of
external lamp
Other
• Select "None" if you do not want to use an ex‐
ternal lamp.
• For the "Indoor" version, select:
6GF3400-0LT01-7BA1
• For the "Outdoor" version, select: "Other" and
leave the additional lamp parameters at the de‐
fault values (see Figure 8-12 Options (Page 97))
Product name -- -- In this input box, you can assign a name to the lamp.
Possible values: Letters, numbers and ASCII special
characters. Maximum of 255 characters.
Flash ☐ / ☑ -- Not relevant for SIMOCRANE CenSOR
Permanent light ☐ / ☑ --
Polarized ☐ / ☑ --
Main beam ☐ / ☑ --
Unpolarized ☐ / ☑ --
Parameterization
8.4 Settings
SIMOCRANE CenSOR
98
Operating Instructions, 07/2021