manualshive.com logo in svg

Siemens 6GA7202-2AA10-1BF1, Operating Instructions Manual, Page: 30 / 168

Share
Download
Siemens 6GA7202-2AA10-1BF1 Operating Instructions Manual Download Page 30

4.6.3

IR flash

A flash is provided to improve detection performance.

Shorter exposure times can be achieved, making faster sampling rates possible.

The flash can improve the response times of the control on interference if SIMOCRANE CenSOR 
is used in conjunction with:

• SIMOCRANE SC integrated 

- or - 

• SIMOCRANE CeSAR standalone

Flashes used

Table 4-1

Versions

Version 1 (indoor)

Version 2 (outdoor)

The flash is attached to the camera by means of a bracket.
The IR flash consists of a large number of IR LEDs. 
A continuously lit red LED is provided for checking the pres‐
ence of the power supply.

The IR flash is mounted on the stainless steel housing.
Two green LEDs that light up at the set flash pulse are provided 
for checking the flash function.

System description
4.6 Components

SIMOCRANE CenSOR

28

Operating Instructions, 07/2021

Summary of Contents for 6GA7202-2AA10-1BF1









































































































































































Reviews:

No comments