Siemens 6GA7202-2AA10-1BF1, Operating Instructions Manual, Page: 75 / 168

Quality values
The "Quality values" group is displayed as soon as a program is started.
This box contains an overview of the most important results of the last image processing
operation. To view a detailed description of a measured value, move the mouse over the quality
code (e.g. CPX) and a tooltip with more information will open.
Note
Display of values
These values are also displayed when you move the mouse over the reflector in the camera
image.
Table 8-11 Quality values / measured values
Variable Meaning Explanation and unit
Security Detection reliability Detection reliability of the reflector as a percentage
CPX X direction Deflection of the reflector in the X direction in mm
CPY Y direction Deflection of the reflector in the Y direction in mm
CDI Distance Distance between camera and reflector in mm
CRO Skew Skew of the reflector in degrees
CR2 Skew2 Skew of the additional reflector in degrees (only if ac‐
tivated)
CSZ Size Edge length of a white reflector area in pixels
CEX Exposure time New exposure time in µs
CGN Gain New value for brightness
Info statistics
The "Info statistics" group is displayed automatically as soon as a program is started.
The statistical information on the relevant number of processing procedures and read
operations is provided as a percentage (%).
Table 8-12 Info statistics
Menu command
or parameter Description
Total counter Absolute number of total processing procedures
Temporary error Not relevant for CenSOR
Read • Absolute number of successful image processing procedures
• Relative number of successful image processing procedures
NOK
• Absolute number of unsuccessful image processing procedures
• Relative number of unsuccessful image processing procedures
Parameterization
8.2 Application
SIMOCRANE CenSOR
Operating Instructions, 07/2021
73