Siemens 6GA7202-2AA10-1BF1, Operating Instructions Manual, Page: 58 / 168

Figure 7-7 Options: Lighting
Step 2: Set the lighting parameters
Move the hoist to a position where the reflector can definitely be detected by the camera. 50%
of the possible travel path of the hoist is recommended for optimal parameter settings.
Open the "Program" menu under "Application" and then the options for "Image acquisition". Set
the values for the parameters "Exposure time" and "Brightness" such that you can clearly see the
reflector in the preview image. Due to the highly reflective foil of the reflector and the installed
flash, the parameter values should be set such that no objects in the surrounding environment
are visible in the image.
Recommendation for settings: The "Brightness" value should be approx. 10% of the "Exposure
time" value.
Commissioning
7.3 Setting up the camera
SIMOCRANE CenSOR
56
Operating Instructions, 07/2021