![background image](http://html.mh-extra.com/html/sick/flexi-soft/flexi-soft_operating-instructions-manual_1264304029.webp)
Operating Instructions
Chapter
4
Flexi Soft Gateways
8012664/XB29/2013-06-11
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
29
Subject to change without notice
Mounting and basic
configuration of the gateways
As an example, the following hardware configuration may appear:
Click
Disconnect
to go into the offline mode if you want to change the configuration of
the Flexi Soft modules.
4.3.2
Configuration of the gateways
For the configuration of the gateways please refer to the sections on the related gateway:
section 5.2 “EtherNet/IP gateway” on page 52
section 5.3 “Modbus TCP gateway” on page 75
section 5.4 “PROFINET IO gateway” on page 84
section 5.5 “EtherCAT gateway” on page 101
section 6.1 “PROFIBUS DP gateway” on page 116
section 6.2 “CANopen gateway” on page 130
For the configuration of the TCP/IP interface of the Ethernet gateways, please refer to the
following sections:
section 5.1.1 “TCP/IP configuration interface” on page 32
section 5.1.2 “Ethernet TCP/IP socket interface” on page 37
For the configuration of the operational data (data transfer from and to the network),
please refer to chapter 7 “Layout and content of the process image” on page 173.
More information can be found in the Flexi Soft Designer operating instructions
(SICK part no. 8012998).
Fig. 8: Hardware configura-
tion dialog