![background image](http://html.mh-extra.com/html/sick/flexi-soft/flexi-soft_operating-instructions-manual_1264304106.webp)
Chapter
5
Operating Instructions
Flexi Soft Gateways
106
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8012664/XB29/2013-06-11
Subject to change without notice
Ethernet gateways
Input PDOs
Index
Size
Content
1A00h
11 bytes
Diag byte + input data set 1
1A01h
21 bytes
Diag byte + input data sets 1-2
1A02h
31 bytes
Diag byte + input data sets 1-3
1A03h
41 bytes
Diag byte + input data sets 1-4
1A04h
51 bytes
Diag byte + input data sets 1-5
Output PDOs
Index
Size
Content
1600h
10 bytes
Output data set 1
1601h
20 bytes
Output data sets 1-2
1602h
30 bytes
Output data sets 1-3
1603h
40 bytes
Output data sets 1-4
1604h
50 bytes
Output data sets 1-5
Select one of the five available PDOs for each data transfer direction (input and output)
with the appropriate size for the used process data in the EtherCAT network configura-
tion tool.
Only one input PDO and one output PDO can be active at any time.
If the selected PDO is greater than the process data configured, unused data will be
filled with zeroes.
If the selected PDO is smaller than the process data configured, excess data will be
truncated.
Example — How to select the PDOs using TwinCAT:
Under the
Process Data
file card, select the desired PDO type (
Inputs
or
Outputs
) in the
Sync Manager
selection list.
Then select the desired PDO in the
PDO Assignment
selection list. In order to change
the PDO you need to deselect the active one first.
In the
Download
area, select
PDO Assignment
but leave
PDO Configuration
unchecked
since the PDO configuration is predefined and can not be changed.
Tab. 74: Process data
objects of the FX0-GETC
Notes
Fig. 50: PDO configuration in
the EtherCAT network confi-
guration tool