![background image](http://html.mh-extra.com/html/sick/flexi-soft/flexi-soft_operating-instructions-manual_1264304008.webp)
Chapter
1
Operating Instructions
Flexi Soft Gateways
8
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8012664/XB29/2013-06-11
Subject to change without notice
About this document
1.4
Information depth
These operating instructions contain information on the Flexi Soft gateways on the
following subjects:
mounting
implementation into a network
configuration via Flexi Soft Designer software
data transfer to and from the network
status information, planning and related mapping
part numbers
Warning
!
Pay attention to the safety notes and safety measures on the Flexi Soft gateways!
We also refer you to our homepage on the Internet at
There you will find the following files for download:
FX0-GENT EDS file for EtherNet/IP
FX0-GPNT GSDML file for PROFINET IO
FX0-GPRO GSD file for PROFIBUS DP
FX0-GCAN EDS file for CANopen
FX0-GDEV EDS file for DeviceNet
FX0-GETC ESI file for EtherCAT
1.5
Scope
These operating instructions are valid for all Flexi Soft gateway modules.
This document is part of SICK part number 8012662 (“Flexi Soft gateways” operating
instructions in all available languages).
These operating instructions are the original operating instructions.
1.6
Abbreviations used
Comma separated values
Enhanced Function Interface
Hexadecimal notation (e.g. 72h = 114)
Short integer = 1 byte
Unsigned double integer = 4 bytes = 2 Words
Unsigned integer = 2 bytes = 1 Word
Unsigned short integer = 1 byte
WARNING
Note
CSV
EFI
h
SINT
UDINT
UINT
USINT