![background image](http://html.mh-extra.com/html/sick/flexi-soft/flexi-soft_operating-instructions-manual_1264304043.webp)
Operating Instructions
Chapter
5
Flexi Soft Gateways
8012664/XB29/2013-06-11
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
43
Subject to change without notice
Ethernet gateways
Configuration via Flexi Soft Designer tool
In order to configure the
Application requests (Polling) mode
of the gateway via the Flexi
Soft Designer tool, perform the following steps:
Open the Flexi Soft Designer and load the hardware configuration including the
gateway.
Click on the
Gateways
button above the main window and select the desired gateway or
double click the desired gateway in the hardware configuration view to open the
gateway configuration dialog.
Click on
TCP/IP configuration
on the left hand menu. The following dialog appears:
Activate the
Listen on
radio button.
Enter the
Port
number on which the application will connect.
Select the update mode:
Enable COS update
or
Enable auto update and COS
.
If you have selected
Enable auto update and COS
, select the
Update rate
in ms.
Select which data sets shall be updated: Check the
Update data set n
checkbox.
Fig. 17: TCP/IP configuration
for Application requests
(Polling) mode