![background image](http://html.mh-extra.com/html/sick/flexi-soft/flexi-soft_operating-instructions-manual_1264304174.webp)
Chapter
7
Operating Instructions
Flexi Soft Gateways
174
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8012664/XB29/2013-06-11
Subject to change without notice
Layout and content of the
process image
7.2
Default settings for the operational data
In the delivery status, the operational data are pre-configured. Depending on the gateway
used, these data are subdivided in several data blocks.
The following table gives an overview which bytes are assigned to the default configuration
and how the data are modularised for the different gateways.
EtherNet/IP, Modbus TCP,
Ethernet TCP/IP
PROFINET IO, PROFIBUS DP
Byte
Default assignment Input data set
Default assignment Input data block
0
Logic result 0
Module 1 input
1
Logic result 1
Module 2 input
2
Logic result 2
Module 3 input
3
Logic result 3
Module 4 input
4
Module 1 input
Module 5 input
5
Module 2 input
Module 6 input
6
Module 3 input
Module 7 input
7
Module 4 input
Module 8 input
8
Module 5 input
Module 9 input
9
Module 6 input
Module 10 input
10
Module 7 input
Module 11 input
11
Module 8 input
Module 12 input
#1
(12 bytes)
12
Module 9 input
Module 1 output
13
Module 10 input
Module 2 output
14
Module 11 input
Module 3 output
15
Module 12 input
Module 4 output
16
Module 1 output
Module 5 output
17
Module 2 output
Module 6 output
18
Module 3 output
Module 7 output
19
Module 4 output
Module 8 output
20
Module 5 output
Module 9 output
21
Module 6 output
Module 10 output
22
Module 7 output
Module 11 output
23
Module 8 output
Module 12 output
#2
(12 bytes)
24
Module 9 output
Logic result 0
25
Module 10 output
Logic result 1
26
Module 11 output
Logic result 2
27
Module 12 output
Logic result 3
28
Gateway direct output
values 0
Gateway direct output
values 0
29
Gateway direct output
values 1
Gateway direct output
values 1
30
Gateway direct output
values 2
Gateway direct output
values 2
31
Gateway direct output
values 3
Gateway direct output
values 3
32-35
Not assigned
Not assigned
#3
(12 bytes)
36-47
Not assigned
Not assigned
#4
(12 bytes)
48-49 Not
assigned
#1
(50 bytes)
Not assigned
#5
(2 bytes)
For the FX0-GETC please see Tab. 75 on page 107.
For the FX0-GCAN please see Tab. 110 on page 143.
The default byte assignment can be freely customized as described in the following
section.
Tab. 149: Default configura-
tion for the operational data
transmitted into the network