SEW-Eurodrive MOVIDRIVE MD*60A Series, Operating Instructions Manual

Page: 62 / 102

60
MOVIDRIVE
®
MD_60A Operating Instructions
Complete parameter list
3__ MOTOR PARAMETERS
30_ Limits 1 31_ Limits 2
300/ Start/stop speed 1 0 – 60 – 150 rpm 310 Start/stop speed 2 0 – 60 – 150 rpm
301/ Minimum speed 1 0 – 60 – 5500 rpm 311 Minimum speed 2 0 – 60 – 5500 rpm
302/ Maximum speed 1 0 – 1500 – 5500 rpm 312 Maximum speed 2 0 – 1500 – 5500 rpm
303/ Current limit 1 0 – 150%I
N
313 Current limit 2 0 – 150%I
N
304 Torque limit 0 – 150 %
32_ Motor compensat. 1 (asynchr.) 33_ Motor compensat. 2 (asynchr.)
320/
Automatic adjustment
1
ON / OFF 330
Automatic adjustment
2
ON / OFF
321 Boost 1 0 – 100 % 331 Boost 2 0 – 100 %
322 IxR compensation 1 0 – 100 % 332 IxR compensation 2 0 – 100 %
323 Premagnetizing time 1 0 – 0.1 – 2 s 333 Premagnetizing time 2 0 – 0.1 – 2 s
324 Slip compensation 1 0 – 500 rpm 334 Slip compensation 2 0 – 500 rpm
34_ Motor protection
340 Motor protection 1 ON / OFF 342 Motor protection 2 ON / OFF
341 Cooling type 1
FAN COOLED / forced-
cooling
343 Cooling type 2
FAN-COOLED / forced-
cooling
35_ Motor sense of rotation
350
Change direction
of rotation 1
ON / OFF 351
Change direction
of rotation 2
ON / OFF
360 Startup YES / NO Only available in DBG11A, not in MOVITOOLS/SHELL!
4__ REFERENCE SIGNALS
40_ Speed reference signal
400 Speed reference value 0 – 1500 – 5000 rpm
401 Hysteresis 0 – 100 – 500 rpm
402 Delay time 0 – 1 – 9 s
403 Signal = "1" if: n < n
ref
/ n > n
ref
41_ Speed window signal
410 Window center 0 – 1500 – 5000 rpm
411 Range width 0 – 5000 rpm
412 Delay time 0 – 1 – 9 s
413 Signal = "1" if: INSIDE / OUTSIDE
42_ Speed setp./act. val. comp.
420 Hysteresis 1 – 100 – 300 rpm
421 Delay time 0 – 1 – 9 s
422 Signal = "1" if: n <> n
setpt
/ n = n
setpt
43_ Current reference signal
430
Current reference
value
0 – 100 – 150 % I
N
431 Hysteresis 0 – 5 – 30 % I
N
432 Delay time 0 – 1 – 9 s
433 Signal = "1" if: I<I
ref
/ I>I
ref
44_ Imax signal
440 Hysteresis 0 – 5 – 50 % I
N
441 Delay time 0 – 1 – 9 s
442 Signal = "1" if: I = I
max
/ I < I
max
Par.
Name
Setting range
Factory setting After
startup
Par.
Name
Setting range
Factory setting After
startup
Variable par.
Parameter set 1
Parameter set 2
0 0
I