SEW-Eurodrive MOVIDRIVE MD*60A Series, Operating Instructions Manual, Page: 71 / 102

MOVIDRIVE
®
MD_60A Operating Instructions
69
Operating displays
Information
messages Information messages on the DBG11A (approx. 2 s in duration) or in MOVITOOLS/
SHELL (message which can be acknowledged):
No. Text DBG11A/SHELL Description
1 ILLEGAL INDEX Index addressed via interface is not available.
2 NOT IMPLEMENTED
• Attempt to execute a non-implemented function.
• An incorrect communication service has been selected.
• Manual mode selected via impermissible interface (e.g. fieldbus).
3 READ ONLY VALUE Attempt to edit a read only value.
4 PARAM. LOCKED Parameter lock P803 = "ON". Parameter cannot be altered.
5 SETUP ACTIVE Attempt to alter parameters during active factory setting.
6 VALUE TOO LARGE Attempt to enter a value which is too large.
7 VALUE TOO SMALL Attempt to enter a value which is too small.
8 REQ. PCB MISSING The option pcb required for the selected function is missing.
-
10 ONLY VIA ST1 Manual mode must be completed using X13:ST11/ST12 (RS-485).
11 TERMINAL ONLY
Manual mode must be completed using TERMINAL (DBG11A or
USS21A).
12 NO ACCESS Access to selected parameter refused.
13 NO CTRLER. INHIBIT Set terminal DIØØ "/Controller inhibit" = "0" for the selected function.
14 INVALID VALUE Attempt to enter an invalid value.
--
16 PARAM. NOT SAVED
EEPROM buffer overrun, e.g. due to cyclical write accesses. Parameter is
saved in EEPROM and is not protected against loss following POWER
OFF.