MOVIDRIVE
®
MD_60A Operating Instructions
53
Startup with a PC and MOVITOOLS
5.4
Startup with a PC and MOVITOOLS
General
information
•
Terminal X13:1 (DIØØ "/CONTROL.INHIBIT") must get a "0" signal!
•
Start the MOVITOOLS program.
•
Set the language.
•
Select the PC port (PC COM) to which the inverter is connected.
•
Select <Update> to display the connected inverter.
Commencing
startup
•
Click on <Shell> in "Execute Program". The Shell program is started.
•
Select the [Startup] / [Startup...] menu command. MOVITOOLS opens the startup
menu.
•
Select asynchronous or synchronous as the motor type.
•
Select parameter set 1 or 2. With speed-controlled drives, the speed controller can
be selected separately when startup is repeated. When startup is repeated, the
startup functions of the DIP11A absolute encoder interface, if installed, can also be
selected separately.
•
Set the operating mode.
•
Select an SEW motor (2 or 4-pole) or a non-SEW motor. SEW motors with more than
four poles are set as non-SEW motors.
•
Enter the motor type data and, if speed control is being used, the speed controller
data as well.
•
Press <Finish> to complete the startup.
•
Make any necessary parameter settings using the main menu or the user menu.
•
Save the parameter set. The parameter set can be transferred to other MOVIDRIVE
®
units.
•
Print out the set parameters using [File] / [Print Data].
•
Refer to the information in Sec. "Starting the motor" (
→
page 277) for starting the
motor.
05032AEN
Fig. 46: MOVITOOLS startup window
0
0
I
Summary of Contents for MOVIDRIVE MD*60A Series
Page 3: ...MOVIDRIVE MD_60A Edition 09 2001 Operating Instructions 1053 2617 EN ...
Page 4: ...SEW EURODRIVE ...
Page 100: ...10 2000 ...
Page 101: ...10 2000 ...
