MOVIDRIVE
®
MD_60A Operating Instructions
11
Unit design, size 4
3.5
Unit design, size 4
MD_60A-503 (400/500 V units): 0370 / 0450
MD_60A-203 (230 V units): 0220 / 0300
1. X2: PE connection
2. X1: Mains connection L1 (1) / L2 (2) / L3 (3)
3. X4: DC link connection -U
Z
/ +U
Z
and PE connection
4. X2: PE connection
5. X2: Motor connection U (4) / V (5) / W (6)
6. X3: Braking resistor connection R+ (8) / R- (9) and PE connection
7. TERMINAL: Option slot for DBG11A keypad or USS21A serial interface
8. Control pcb on CONTROL option slot
9. X11: Electronics terminal strip (setpoint input AI1 and 10 V reference voltage)
10.Switch S11 (signal type AI1) and switch S12 (system bus terminating resistor)
11.X12: Electronics terminal strip system bus (SBus)
12.7-segment display
13.X10: Electronics terminal strip binary outputs and TF/TH input
14.X13: Electronics terminal strip binary inputs and RS-485 interface
15.Only MDV/MDS, X14: Incremental encoder simulation or external encoder input (9-
pin sub D plug)
16.Only MDV/MDS, X15: Motor encoder input (9-pin sub D socket)
17.OPTION1 and OPTION2: Option slots 1 and 2
18.Connection for electronics shield clamps
01249BXX
Fig. 7: Unit design, MOVIDRIVE
®
size 4
4
5
6
14
15
13
16
17
18
2
3
1
7
9
8
10
11
12
Summary of Contents for MOVIDRIVE MD*60A Series
Page 3: ...MOVIDRIVE MD_60A Edition 09 2001 Operating Instructions 1053 2617 EN ...
Page 4: ...SEW EURODRIVE ...
Page 100: ...10 2000 ...
Page 101: ...10 2000 ...
