SEW-Eurodrive MOVIDRIVE MD*60A Series Operating Instructions Manual Download Page 54

Page: 54 / 102

MOVIDRIVE

MD_60A Operating Instructions

Startup with the DBG11A keypad

Startup
procedure

1. Press "YES" to commence the speed controller startup. All mass moments of inertia must be

entered in the unit [10

-4

kgm

2. Press the

↑

key to move on to the next menu item each time.

3. Enter the correct encoder type.

4. Enter the correct encoder resolution.

WITH SEW MOTORS

5. Enter whether the motor has a brake.

6. Set the rigidty of the closed-loop control system.

7. Enter whether the motor has a flywheel fan (Z fan).

WITH NON-SEW MOTORS

5. Enter the moment of inertia of the motor.

6. Set the rigidity of the closed-loop control system.

7. Set the moment of inertia of the brake and the fan.

8. Enter the mass moment of inertia of the load (gear unit + driven machine) extrapolated for

the motor shaft.

9. Enter the time for the shortest ramp.

10. Commence the speed controller startup calculation by selecting "YES".

11. The "SAVE" menu command appears automatically. Set "SAVE" to "YES". The data are

copied into the non-volatile memory of MOVIDRIVE

12. The "SAVE" menu command appears again. Press the E or Q key to exit the startup menu.

The main display then appears.

•

Copy the parameter set from MOVIDRIVE

into the DBG11A keypad after

completing the startup (P807 "MDX

→

DBG"). In this way, it is possible to use the

DBG11A to transfer the parameter set to other MOVIDRIVE

units (P 806 "DBG

→

MDX").

•

Enter any parameter settings which differ from the factory settings in the parameter
list (

→

page 280).

•

In the case of non-SEW motors, set the correct brake reaction time (P732 / P735).

•

Refer to the information in Sec. "Starting the motor" (

→

page 277) for starting the

motor.

•

With

∆

connection and transition point at 87 Hz

→

Set parameter P302/312

"Maximum speed 1/2" to the value for 87 Hz.

•

Activate encoder monitoring for TTL sensors and sin/cos encoders (P504 = "ON").

Summary of Contents for MOVIDRIVE MD*60A Series







































































































Search results

Summary of Contents for MOVIDRIVE MD*60A Series

Reviews:

Related manuals for MOVIDRIVE MD*60A Series

Brands by name

Popular brands

SEW-Eurodrive MOVIDRIVE MD*60A Series, Operating Instructions Manual

Search results

Summary of Contents for MOVIDRIVE MD*60A Series

Reviews:

Related manuals for MOVIDRIVE MD*60A Series

Brands by name

Popular brands