SEW-Eurodrive MOVIDRIVE MD*60A Series, Operating Instructions Manual

Page: 59 / 102

MOVIDRIVE
®
MD_60A Operating Instructions
57
Complete parameter list
5.6 Complete parameter list
The parameters of the short menu are identified by a "/" (= displayed on the DBG11A keypad).
Par. Name Value range Par. Name Value range
DISPLAY VALUES 06_ Binary outputs option
00_ Process values 060 Binary output DO1Ø
000 Speed -5000 – 0 – 5000 rpm 061 Binary output DO11
001/ User display [Text] 062 Binary output DO12
002 Frequency 0 – 400 Hz 063 Binary output DO13
003 Actual position 0 – 2
31
-1 inc 064 Binary output DO14
004 Output current 0 – 200 % I
N
065 Binary output DO15
005 Active current -200 – 0 – 200 % I
N
066 Binary output DO16
006/ Motor utilization 1 0 – 200 % 067 Binary output DO17
007 Motor utilization 2 0 – 200 % 068/ Status binary outputs option
008 DC link voltage 0 – 1000 V 07_ Unit data
009 Output current A 070 Unit type
01_ Status displays 071 Unit rated current
010 Inverter status 072 Option 1
011 Operational status 073 Option 2
012 Fault status 074 Firmware option 1
013 Active parameter set 1/2 075 Firmware option 2
014 Heat sink temperature -20 – 0 – 100 °C 076 Firmware basic unit
015 Mains ON operation time 0 – 25000 h 077 Technology function
016 Operating time (enabled) 0 – 25000 h 08_ Fault memory
017 Electrical energy kWh 080/ Fault t-0
02_ Analog setpoints 081 Fault t-1
020 Analog input AI1 -10 – 0 – 10 V 082 Fault t-2
021 Analog input AI2 -10 – 0 – 10 V 083 Fault t-3
022 External current limit 0 – 100 % 084 Fault t-4
03_ Binary inputs basic unit 09_ Bus diagnosis
030 Binary input DIØØ /CONTROL.INHIBIT 090 PD configuration
031 Binary input DIØ1 091 Fieldbus type
032 Binary input DIØ2 092 Fieldbus baud rate
033 Binary input DIØ3 093 Fieldbus address
034 Binary input DIØ4 094 PO1 setpoint
035 Binary input DIØ5 095 PO2 setpoint
036/ Status binary inputs basic unit 096 PO3 setpoint
04_ Binary inputs option 097 PI1 actual value
040 Binary input DI1Ø 098 PI2 actual value
041 Binary input DI11 099 PI3 actual value
042 Binary input DI12
043 Binary input DI13
044 Binary input DI14
045 Binary input DI15
046 Binary input DI16
047 Binary input DI17
048/ Status binary inputs option
05_ Binary outputs basic unit
050 Binary output DBØØ /BRAKE
051 Binary output DOØ1
052 Binary output DOØ2
053/ Status binary outputs basic unit
0 0
I