SCANCLIMBER 65H Series, Instruction Manual

Page: 66 / 164

O p e r a t i n g i n s t r u c t i o n s
8
V115E_09.20
Series-65H Hoist Pos 3
3.3 Start and Stop of the Hoist
3.3.1 Relay Control
1. Close the door / the gate at
the ground station / on the
landing and the hoist door.
2. Push the button “Up” (S2,
S22, S22.n), the hoist starts
moving upwards.
3. Push the button “Down” (S3,
S23, S23.n), the hoist starts
moving downwards.
4. By pushing the buttons “Stop
next landing” (S4, S24, S24.n)
the hoist is stopped on the
next landing in the direction of its mo-
tion. The hoist stops on the top and bot-
tom landings automatically.
5. In case of emergency hit the “Emer-
gency stop” button (S1, S21) down,
and the hoist stops immediately. The
button locks to its down position. The
button is released by turning it clock-
wise and/or pulling outwards.
6. On the landing the red button (S21.n)
stops the hoist immediately, but it is not
an emergency stop button and does
not lock when pushed.
(The buttons S1, S2, S3, S4 are situated in the
case, the buttons S21, S22, S23, S24 at the
ground station and the buttons S22.n, S23.n,
S24.n, S21.n on the landings)
The hoist does not move if any
of the landing gates or doors is
open. The hoist does not move
if the roof hatch is open or if the
hoist is overloaded.
☞
+OP4.n
-X11.n
-S23.n
-S22.n
-S24.n
-H2
-X13.n
-S16 -S15 -S3
-S4 -S2
-Q2
-A3
-H4 -H3 -H2