26
V115E_09.20
T r o u b l e s h o o t i n g
Series-65H Hoist Pos 4
KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V106-E 21.12.2016 Page - 176 -
F112
Wrong Direction
-
Please change the encoder channels A/B, because t
he machine rotates in the wrong direction!
-
Perhaps it is the wrong type of encoder? ->
Menu A4 Motor/Gearbox -> Encodersystem
-
The number of pulses are wrong? ->
Menu A4 Motor/Gearbox -> Encoder Pulses
-
The encoderwire is out of order or too long ( >30m) ! -> Please increase the encoder voltage !
-
The encoder-shield is not connected on both sides -> Change it immedately!
-
The encoderwire is parallel to the motorwire -> Change it immedately!
- The encoder coupling or the encoder is not mechanical fixed with the Motorwave -> Please check it!
F113
Speed Variance
–
The motor works, but the encoder is out of order or wrong connected. -> Control the pining!
-
Perhaps it is the wrong type of encoder? ->
Menu A4 Motor/Gearbox -> Encodersystem
-
The number of pulses are wrong? ->
Menu A4 Motor/Gearbox -> Encoder Pulses
-
The encoderwire is out of order or too long ( >30m) ! -> Please increase the encoder voltage !
-
The encoder-shield is not connected on both sides -> Change it immedately!
-
The encoderwire is parallel to the motorwire -> Change it immedately!
-
The motor and his metal socket is grounded very bad ->
Change it immedately!
-
The frequency inverter is not connected with the earth
-> Change it immedately!
-
The motorwire-shield is not connected on both sides -> Change it immedately!
-
The brakeresistorrwire-shield is not connected on both sides -> Change it immedately!
-
The encoder coupling or the encoder is not mechanical fixed with the Motorwave -> Please
check it!
-
The frequency inverter has a current limit (full power) -> Power class too low
- Is the car easily running ? Have the fixing shoes enough oil ? Is the half-load OK ?
F114
No Encoder Pulse
-
The motor works, but the encoder is out of order or wrong connected. -> Control the pining!
-
Perhaps it is the wrong type of encoder? ->
Menu A4 Motor/Gearbox -> Encodersystem
-
The number of pulses are wrong? ->
Menu A4 Motor/Gearbox -> Encoder Pulses
-
The encoderwire is out of order or too long ( >30m) ! -> Please increase the encoder voltage !
-
The encoder-shield is not connected on both sides -> Change it immedately!
-
The encoderwire is parallel to the motorwire -> Change it immedately!
-
The motor and his metal socket is grounded very bad ->
Change it immedately!
-
The frequency inverter is not connected with the earth
-> Change it immedately!
-
The motorwire-shield is not connected on both sides -> Change it immedately!
-
The brakeresistorrwire-shield is not connected on both sides -> Change it immedately!
!
- The encoder coupling or the encoder is not mechanical fixed with the Motorwave -> Please check it
F115
DC Precharge
:
-
After switch ON the inverter, the DC-voltage is too low -> Earth connection of the brake resistor
wire
-
After switch ON the inverter, the DC-voltage is too low -> Earth connection of the brake resistor
wire
- After switch ON the inverter, the DC-voltage is too low -> The little two fuses into the inverter are out
of order !
F116
Release Change during the travel – Lift controller error
– Error of the lift controller or wrong settings in the parameter oft the controller / inverter!
F117
Liftbus communiction during the travel is out of:
-
Wrong Liftbus parameter !
- Wrong Liftbuscable or the shield not connected
F118
SSI-Communication:
-
Is there really
SSI-encoder connected
? ->
Menu A4 Motor/Gearbox -> Encodersystem
-
The encoder is out of order, e.g. after the test of the safetygear ?
-
The encoder is wrong connected -> Please check the pining -> Do you use the right adapter ?
-
The encoderwire is out of order or too long ( >30m) ! -> Please increase the encoder voltage !
-
The encoderwire is parallel to the motorwire -> Change it immedately!
- The encoder coupling or the encoder is not mechanical fixed with the Motorwave -> Please check it!
F119
EnDat-Communication:
-
Is there really
EnDat-encoder connected
? ->
Menu A4 Motor/Gearbox -> Encodersystem
-
The encoder is out of order, e.g. after the test of the safetygear ?
-
The encoder is wrong connected -> Please check the pining -> Do you use the right adapter ?
-
The encoderwire is out of order or too long ( >30m) ! -> Please increase the encoder voltage !
-
The encoderwire is parallel to the motorwire -> Change it immedately!
The encoder coupling or the encoder is not mechanical fixed with the Motorwave -> Please check it!
Summary of Contents for 65H Series
