5
V115E_09.20
Service and maintenance
Series-65H Hoist Pos 5
Inspection forms
V115B_01.15
Series-65H Hoist Pos 8
SC HOIST INSPECTION FORMS
Measure - serwis and maintenence
40 servis
hours
160 serwis
hours
Method
1.
Check and clean work area around hoist.
x
Visual
2.
Ground station and cage damage.
x
Visual
3.
Check and clean area inside the ground station/cage and
on the roof
Visual
4.
That the ground has not sunk and that the mast is vertical
x
Visual
5.
Check
mast prolongation.
Fastening and condition of mast sections and racks.
Check of the fastening bolts in the mast sections. If you
suspect looseness tighten them.
x
Visual
Test
6.
Check the mast anchoring. All the fastening screws in
every anchoring section should be tightened. Wall ties
and cuplers screw.
x
Visual
Tighening
7.
Visual check of the mast pipes (check wear, cracks, scrat-
ches, corrosion). If longitudinal grooves or excessive wear
is discovered adjust the guide roller. Check the condition
of the pinion and the counter roller. Adjust.
x
According to chapter 6.17
Erection
8.
That the guide rollers are in proper places, condision, cle-
arances, wear, fixinng and tightening. Check the bearings
in the guide rollers.
x
Visual and test
Adjust or replace.
According to chapter 6.17
Erection
9.
Ground station and cage doors function
x
Test
10.
Power cable and control cable damages/ twisting.
Check the cable by its full length (for fractures, curling).
The coiling of the cable into the basket.
x
Visual
11.
Check bumpers
x
Visual
12.
Check safety circuit - function of all limit switches and
that the cage does not start moving if any of the cage
or landing gates/doors is open or If the emergency stop
button is pushed down
x
Test
13.
Check the operation of the control device, the alarm sig-
nal, lighting and emergency stops
x
Test
14.
Check the cage doors. Are the cable wires in good con-
dition and greased? Do the doors move smoothly? Does
the door locking work properly? Are the limit switches
adjusted?
x
Test
Grease
15.
Warning/instruction plates positioned and readable
x
Visual
16.
Instruction manual in the box
x
Visual
17.
Check the cable quide fixings and cable guide rubber
x
Visual
Tighening
Summary of Contents for 65H Series
