SCANCLIMBER 65H Series, Instruction Manual

Page: 50 / 164

S a f e t y i n s t r u c t i o n s
16
V115E_09.20
Series-65H Hoist Pos 2
DECAL SCXXYYFL
INSTRUCTIONS FOR USE
PUT INTO SERVICE
CHECK, THAT THE HOIST WAY IS FREE
SWITCH ON THE MAIN SWITCH (F1) IN THE GROUND STATION CONTROL BOX TO
POSITION "1"
THERE IS AN OVERLOAD IN CAGE WHEN YELLOW PILOT LAMP (H3)"OVERLOAD"
IN THE CAGE CONTROL PANEL IS ON. REMOVE OVERLOAD.
HOIST IS READY TO RUN WHEN THE GREEN PILOT LAMP (H4)"READY" IN THE
CAGE CONTROL PANEL IS ON.
SWITCH ON THE MAIN SWITCH (Q2) IN THE HOIST CAGE CONTROL PANEL TO
POSITION "1"
HOIST POWER SUPPLY IS IN ORDER WHEN THE GREEN PILOT LAMP (H1) "POWER
SUPPLY" IN THE DOOR OF CONTROL BOX OF GROUND STATION IS ON.
THERE IS SAFETY CIRCUIT BROKEN WHEN RED PILOT LAMP (H2) "SAFETY
CIRCUIT" IN THE CAGE CONTROL PANEL IS ON. WHEN SAFETY CIRCUIT IS BROKEN,
IT IS NOT POSSIBLE TO THE HOIST. SEE ERROR CODE FROM DISPLAY.
START AND STOP
CLOSE DOORS ( DOOR OR LANDING GATE/DOOR AND CAGE DOOR). GROUND STATION
A) AUTO - MODE
B) MANUAL - MODE
SELECT CONTROL MODE WITH SWITCH (S20 ) "CONTROL MODE" . TURN SWITCH
TO POSITION 1 - "AUTOMATIC".
ENTER LANDING NUMBER FROM KEYBOARD WHERE YOU WANT TO GO. FOR
EXAMPLE, IF YOU WANT TO GO TO FIFTH FLOOR, PRESS KEY "5" AND CONFIRM
WITH KEY "#"=>HOIST STARTS, AND STOPS AUTOMATICALLY ON FIFTH FLOOR.
SELECT CONTROL MODE WITH SWITCH (S20) "CONTROL MODE" . TURN SWITCH
TO POSITION 0 - "MANUAL".
PUSH THE BUTTON (S2)"UP" IN CAGE CONTROL PANEL. CAGE MOVES UP-
WARDS AS LONG AS BUTTON IS PUSHED AND STOPS WHEN BUTTON IS RELEASED.
PUSH THE BUTTON (S3) "DOWN" IN CAGE CONTROL PANEL. CAGE MOVES
DOWNWARDS AS LONG AS BUTTON IS PUSHED AND STOPS WHEN BUTTON IS
RELEASED.
WHEN IN DANGER, PUSH THE "EMERGENCY STOP" - BUTTON (S1,S21) DOWN
AND THE HOIST STOPS IMMEDIATELY . THE BUTTON IS MECHANICALLY LOCKED
TO IST LOWER POSITION AND HAS TO TURNED CLOCKWISE AND/OR PULLED
OUTWARDS BEFORE IT IS RELEASED AGAIN.
Ta 501 SH 1/2