SCANCLIMBER 65H Series, Instruction Manual

Page: 69 / 164

11
O p e r a t i n g i n s t r u c t i o n s Series-65H Hoist Pos 3
V115E_09.20
3.4 Closing the Operation
Drive the hoist to the ground station .
Close the hoist and the ground station
doors .
Switch the main switch (Q1) in the ground
station control box to position “0” . If neces-
sary lock the disconnecting switch with a
separate lock.
1. Use the keyboard to se-
lect the desired floor, for in -
stance if you wish to get to
the fifth floor push the digit
key 5 and confirm by push
-
ing the key # => the hoist
starts moving and stops au-
tomatically on the fifth floor.
Close the door/the gate at the ground station or on the landing and the hoist door.
3.3.3 PLC (Programmable Logic Control) ver. 2
While travelling up the PLC sorts landings
into sequential order of low to high, then
low again for landings already passed and
stops according to this order.
An example of foult shown on the display
H65
Ready Overload Out
of service
Cage
light
Alarm
H63 H66
1 2 3
4 5 6
7 8 9
*
0 #
S103 S30
S60.1
EMERGENCY
STOP
60 %
ON
80 %
100 %
cage position
selected floor
call input
+OP2
+OP4 Landing control box
- use for landing control (PLC ver.2)