SCANCLIMBER 65H Series, Instruction Manual

Page: 79 / 164

21
O p e r a t i n g i n s t r u c t i o n s Series-65H Hoist Pos 3
V115E_09.20
3.10 Hydraulic Ramp
The hoist can be equipped with an option-
al hydraulic ramp. When using a ramp it is
not necessary to build a pipeline, that saves
time and material expense when erecting
the hoist. See chapter 6 The erection of the
Hoist for the installation instructions.
The access ramp is equipped with safety
railings opening up to both sides when the
ramp is lowered.
The ramp position is controlled by limit
switches.
Opening
Closing
1. The cage stops at the required land-
ing automatically. The hydraulic
ramp lowers automatically after the
cage has stopped. When the ramp
is in the lower position the cage door
locking is released.
2. Push the sliding door up to open
position.
1. Close the cage sliding door by pulling
it to the closed position.
2. The hydraulic ramp is lifted auto-
matically when the hoist gets the
command to drive. The cage door
locking locks the door. The hydraulic
ramp closure is secured with the limit
switch prior to the hoist movement.
Attention! When getting off the
hoist open the landing gate
prior to closing the cage door.
☞