SCANCLIMBER 65H Series, Instruction Manual, Page: 103 / 164

21
T r o u b l e s h o o t i n g
V115E_09.20
Series-65H Hoist Pos 4
4.5.6 Frequency conventer and hoist controller fault
4.5.6.1 Hoist controller fault
More complicated faults can be divided
into two categories: frequency converter
faults and hoist controller faults. Control-
ler fault can be found in HPG60 device in
menu C3 Fault Log. Frequency converter
fault will also be signalled in HPG60 but full
error will be display on Frequency convert-
er front panel in OP6.
Hoist controller fault can be found in HPG60
device in menu C3 Fault Log.
C3 FAULT LOG
Error memory is accommodated in sub-
menu C3 in C 31. Error memory
prossesses a depth of 200 possible er-
ror registrations. The most current en-
try always stands on position one and
shifts all following entries on a deep-
er position. After return the highest er-
ror position, the error memory can be
cleared by menu C30.Error memory is
stored in Akku RAM of the clock com-
ponent and is secured against pow-
er failure.
HPG60 device can be opetated
only by qualified professionals in
electricity.
☞
The electrical installations are al-
lowed to be carried out only by
qualified professionals in elec -
tricity.
☞