SCANCLIMBER 65H Series, Instruction Manual

Page: 68 / 164

O p e r a t i n g i n s t r u c t i o n s
10
V115E_09.20
Series-65H Hoist Pos 3
+OP4 Landing control box
- use for landing control
3.3.2.2 Manual control for PLC ver.1
1. Choose with the switch (S20) “ Mode
selection” inside the cage box to posi-
tion “0” – Manual control .
2. Use the push button (S2) “Up” on the
cage control panel to go up and cor-
respondingly the push button (S3)
“Down” to go down. The hoist will move
as long as the button is pushed
and stops immediately when
the button is released.
With manual control from the
hoist the hoist moves in low-
ered speed.
3. In case of emergency hit the
button (S1 or S21) “Emergen-
cy stop” down, and the hoist
stops immediately. The button
locks to its down position. The
button is released by turning it
clockwise and/or pulling out-
wards.
The hoist does not move if any
of the landing gates or doors is
open. The hoist does not move
either if the roof hatch is open or
if the hoist is overloaded.
☞
-H4 -H3 -H2 -S3 -S2
I On
-Q2
O I
1 2 3
4 5 6
7 8 9
*
0 #
Off
I
-S15 -S16 -S20
EMERGENCY
STOP
+OP4.n
-S23.n
-S22.n