SCANCLIMBER 65H Series, Instruction Manual

Page: 37 / 164

3
S a f e t y i n s t r u c t i o n s
V115E_09.20
Series-65H Hoist Pos 2
Safety Instructions and Symbols
In this instruction manual the following
note is used to emphasize the importance
of the matter.
Special information, instructions
and warnings to avoid personal
injuries or material damages.
The hoist is designed and manufactured
in accordance with the existing standards
and safety regulations. Nevertheless, the
operator or third parties may be injured
or killed, or the hoist may be damaged or
cause other material damage, if the hoist is
used carelessly or against the instructions.
2. SAFETY INSTRUCTIONS
2.1 General Information
☞
It is allowed to use the hoist only according
to the instructions and with the hoist in per-
fect technical condition. Also the operator
must be informed about the risks involved in
the operation of the hoist. The defects and
faults weakening the safety should immedi-
ately be repaired.
The builder’s hoist is meant for transporta-
tion of persons and materials only inside the
hoisting cage. As an exception are permit-
ted the hoist’s mounting, dismounting and
maintenance work which are allowed to
be carried out only by persons well familiar
with the hoist and trained for these tasks.
The proper use of the hoist requires good
knowledge and understanding of the oper-
ation and maintenance instructions as well
as the strict following of these instructions.