SCANCLIMBER 65H Series, Instruction Manual, Page: 61 / 164

3
O p e r a t i n g i n s t r u c t i o n s Series-65H Hoist Pos 3
V115E_09.20
3. OPERATING INSTRUCTIONS
3.1 Prior to the Use
Prior to the daily use of the hoist it must be checked both visually and functionally. This in-
spection does not replace the scheduled maintenance and is to be carried out sepa-
rately by the person in charge of the hoist’s operation.
Should during the daily inspection be discovered for instance loose screw connections or
other defects they must be immediately repaired before putting the hoist in use.
3.1.1 Check List
1. The hoist’s driveway must be free of
any obstacles. No material or objects
must protrude from the landings to the
hoist’s driveway.
2. Check the hoist’s foundation. If the
hoist is mounted on ground foundation
check that the ground has not sunk un-
der the hoist.
3. Check the bolt joints of the mast sec-
tions.
4 . Check the fastening of the gear
racks.
5 . Check the bolt joints of the anchor-
age and the ties to the building, pipe-
line and mast.
6. Check the support of the pipeline.
7. Check the landing ties.
8 . Check the clearances of the hoist
guide rollers.
9. Check the functioning of the hoist
doors.
10. Check the condition of the pinions on
the mast side on the ground platform.
11. Check that there are no oil leaks in the
gearboxes.
12. Lubrication of the gear rack.
13. Check the cable guides installed on
the mast. The cable may slip out of the
faulty guide, get caught in the guide or
be squeezed between the hoist guide
rollers and damage.
14. The cable should move freely and be
uncoiled without obstacles.
15. Check the fastening of the limit switch-
es and limit cams as well as the func-
tioning of the limit switches.
16. Check that the passages, railings, etc.
on the landings are in condition ac-
cording to the regulations.
17. The warning and instruction signs
should at all times be well readable.
Damaged signs must be replaced with
new ones.