SCANCLIMBER 65H Series, Instruction Manual, Page: 70 / 164

O p e r a t i n g i n s t r u c t i o n s
12
V115E_09.20
Series-65H Hoist Pos 3
1. Switch the key switch on the hoist roof
“Hoist roof control” to position “1”.
2. The hoist moves only by pushing the
buttons on the roof “Upwards” and
“Downwards” . The hoist stops im-
mediately, when the button is re-
leased. The selection of the “Hoist
roof control” excludes functions
from any other locations for control.
The hoist with a PLC control sys-
tem moves in a lowered speed
when controlled manually from
the hoist roof.
3.5 Erection, Maintenance or Inspection Operations
3. In case of emergency hit the button
“ Emergency stop ” down, and the hoist
stops immediately. The button locks
to its down position. The button is re-
leased by turning it clockwise and/or
pulling outwards.
4. When the hoist is stopped for erection,
maintenance or inspection operations,
the
emergency stop button on the roof
must be pushed down for this period of
time.
5. After finishing the work switch the key
switch on the hoist roof “ Hoist roof con-
trol ” back to position “0” and take the
key from the switch.
When carrying out erection, maintenance or inspection operations the hoist is controlled
with the push button box on the cage roof.
☞
Picture 3.5. Control panel +OP6 on the
cage roof
+OP6
-S51
-S52
-S55
-S53
Control - from hoist roof
UP
DOWN