RTS CLD Color Keypanel Family DKP 16 CLD User Manual Download Page 64

Page: 64 / 160

Metering

allows you to monitor an audio source connected to the keypanel. The energy of that incoming audio is split into

five (5) bands and displayed on the left side of the keypanel, when enabled.

The dB display range is from 28dB below nominal to 8dB above nominal.

The ranges are as follows:

By default,

None

is configured for metering.

NOTE:

Only one channel can be metered at a time.

FIGURE 37.

Metering Explanation

Band 1

100Hz to 400Hz

Band 2

400Hz to 800Hz

Band 3

800Hz to 1.6KHz

Band 4

1.6KHz to 3.2KHz

Band 5

3.2KHz to 15KHz

FIGURE 38.

Metering Bands display

Summary of Contents for CLD Color Keypanel Family DKP 16 CLD

































































































































































Search results

Summary of Contents for CLD Color Keypanel Family DKP 16 CLD

Reviews:

Related manuals for CLD Color Keypanel Family DKP 16 CLD

Brands by name

Popular brands

RTS CLD Color Keypanel Family DKP 16 CLD, User Manual

Search results

Summary of Contents for CLD Color Keypanel Family DKP 16 CLD

Reviews:

Related manuals for CLD Color Keypanel Family DKP 16 CLD

Brands by name

Popular brands