RTS CLD Color Keypanel Family DKP 16 CLD User Manual Download Page 48

Page: 48 / 160

10.

Verify the

version upgrade

in the I/O Card Version Information window is correct.

Download Firmware Using the BLR Function

NOTE:

The instructions provided below are applicable for all CLD family keypanels; however, the instructions below

display the KP 32 CLD

The

BLR

(Boot Loader Reset) button is used to upload new firmware to a keypanel with a corrupt/bad image installed.

run the boot loader

, do the following:

NOTE:

To force a boot reload, the keypanel must first be powered down.

Verify the

KP 32 CLD

is powered off, but still connected to the FRAME.

Summary of Contents for CLD Color Keypanel Family DKP 16 CLD

































































































































































Search results

Summary of Contents for CLD Color Keypanel Family DKP 16 CLD

Reviews:

Related manuals for CLD Color Keypanel Family DKP 16 CLD

Brands by name

Popular brands

RTS CLD Color Keypanel Family DKP 16 CLD, User Manual

Search results

Summary of Contents for CLD Color Keypanel Family DKP 16 CLD

Reviews:

Related manuals for CLD Color Keypanel Family DKP 16 CLD

Brands by name

Popular brands